parking light wiring, 03 dodge diesel
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82316
Printed Date: May 19, 2024 at 11:55 AM
Topic: parking light wiring, 03 dodge diesel
Posted By: expressfish
Subject: parking light wiring, 03 dodge diesel
Date Posted: August 31, 2006 at 3:41 PM
yanked my alarm from my 03 hemi and installed it in an 03 diesel<<<both dodges. Everything works but the flashing parking lights. The alarm is a mothers window tint special, the white wire connects to the purple / YELLOW on the dodge light harness, worked on the hemi , but same wire on diesel will not flash lights !! any input ??
-------------
Eric G......
Replies:
Posted By: Velocity Motors
Date Posted: August 31, 2006 at 4:19 PM
Parking lights require a negative trigger thru a 330 or 1.4K ohm resistor. There is a rest resistance on the wire, so MUST use a relay to isolate away from the switch.
Did you grab the relay as well when you removed it from the Hemi to the diesel ??
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: expressfish
Date Posted: August 31, 2006 at 4:36 PM
yeah, I all the relays were taped together. I wired it jsut as on the hemi. does the cummings have a different wiring harness ? the harness off the light switch has the same colors .
-------------
Eric G......
Posted By: expressfish
Date Posted: September 01, 2006 at 11:13 AM
so does the resistor go between the purple / YELLOW wire and relay ? the white wire going into the relay id hot and coming out is neg.
-------------
Eric G......
|