Remote start activate wire
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82342
Printed Date: May 14, 2025 at 2:22 PM
Topic: Remote start activate wire
Posted By: trieck1232
Subject: Remote start activate wire
Date Posted: September 01, 2006 at 8:59 AM
1995 subaru svx 425/545 code alarm combo one last try, buying viper alarms, again i hate code alarm....any ideas why on the car if i ground out the remote start activate wire the car starts fine, but if you use the remote the car does nothing all that happens is 5 parking light flashes? thinking i need to build a relay of some sort however i havnt had this problem before, ------------- ---Travs---
Replies:
Posted By: profuse007
Date Posted: September 01, 2006 at 11:00 AM
what does that 5 parking light flashes indicate? look in the manual for the diagnostic.
-------------
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Posted By: trieck1232
Date Posted: September 01, 2006 at 11:15 AM
hoodpin; saftey switch, brake not connected, what im geting at is that the car starts if you use the remote start activate wire is grounded, which it should, the manual specifies that the wire is to start vehicle if a ground pulse is applied, so im just baffled, hope sombody knows :)
-------------
---Travs---
Posted By: swamprat323
Date Posted: September 01, 2006 at 11:33 AM
deleat the remotes and re program them.
Posted By: trieck1232
Date Posted: September 01, 2006 at 2:29 PM
same thing....im just confused as all get out on this any more ideas!!?
-------------
---Travs---
Posted By: swamprat323
Date Posted: September 01, 2006 at 2:40 PM
have you called up tech support, did you install this your self or had a shop do it. if a shop take it back. does this happen on both remotes, does any others buttones work. im not sure on the model you have, can you cahnge the button around so the RS is on a differtn button, looks liek your remotes are bad
|