94 Mazda 626 door lock actuator

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8235
Printed Date: July 05, 2025 at 2:40 AM

Topic: 94 Mazda 626 door lock actuator

Posted By: jagger
Subject: 94 Mazda 626 door lock actuator
Date Posted: January 16, 2003 at 6:55 PM

I've just installed a door lock actuator to the driver side door for keyless entry when used with my alarm.

Questions:

1. What fuse rating should I use for the relays used to trigger the door actuator?

2. My door lock actuator has 2 wires (one green, the other blue). Which wire should be goes to the lock relay and unlock relay? I think the actuator model number is TL6002 (that's what's on the box).

thanks in advance.

Replies:

Posted By: BNLUIS
Date Posted: January 16, 2003 at 8:15 PM

https://www.the12volt.com/doorlocks/page3.asp#arp follow this link it will show you a relay set up for the actuator a 15 amp fuse should do the job, test all wires . Good Luck.

posted_image

Posted By: Chris Luongo
Date Posted: January 17, 2003 at 9:20 AM

10 or 15 amps will be fine.

Depending on how you installed the actuator, and what kind of car it is........it may push "outward" to unlock the door...... or it may pull "inward" to unlock the door.

You could spend all day studying the relay diagram, reading the instructions for the actuator, etcetera.......but there's a far simpler way:

Hook the wires up at random; you have a 50% chance of getting it right the first time. If the locks work backward, reverse the connections.

Print Page | Close Window