Warn away when remote started
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82381
Printed Date: July 18, 2025 at 9:00 AM
Topic: Warn away when remote started
Posted By: oakey22
Subject: Warn away when remote started
Date Posted: September 02, 2006 at 6:41 AM
i get the stand back warn away when i activate the remote start and the engine is running, it does this even when the system is not armed. Anyone know what it could be? I have these sensors on the alarm 516U Vocalarm DEI 508D Dual-Zone Sensor Shock sensor and glass breakage.
Replies:
Posted By: Chris Luongo
Date Posted: September 02, 2006 at 10:19 AM
Is it a DEI remote starter as well?
The orange, ground-when-armed output is intended for the starter kill relay, as well as turning on the 508D and the 516U.
However, the orange wire is also active during remote start, as an anti-grind feature.........basically, if the remote starter is on, the starter kill is on too, so that you can't engage the starter again, if you mistakenly turn they key to "Start" when the remote starter is already on.
Go into programming, and switch to "anti-grind OFF," and see if that resolves the problem.
If that fixes it, but you would prefer to have your anti-grind working, I'm sure we can find a way to do that.
Posted By: oakey22
Date Posted: September 02, 2006 at 2:53 PM
I did it, i made it turn off the voice module while the remote start is running. Thanks :)
|