Print Page | Close Window

factory disarm

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82588
Printed Date: July 06, 2025 at 11:08 AM


Topic: factory disarm

Posted By: untame350
Subject: factory disarm
Date Posted: September 07, 2006 at 2:34 PM

if you are connecting  an after market alarm to a car that has a factory alarm do you really have to connect the disarm wire from your after market alarm to the disarm wire of the car even if you have power door locks connected too.



Replies:

Posted By: captainzab
Date Posted: September 07, 2006 at 3:06 PM
Some japanese cars usually arm and disarm with lock & unlock.

Most cars require that you connect the factory alarm disarm wire (or else when you unlock or r/s the factory alarm will go off)

Depends on the car.

-------------
Note: You Always Dont Get What You Pay For.



Posted By: KarTuneMan
Date Posted: September 07, 2006 at 3:31 PM
Depends on the car.

-------------



Posted By: thepencil
Date Posted: September 07, 2006 at 4:04 PM
I alway smile when question like this comes up. WHY? You have a factory alarm. Why would you still want to install one? Maybe it's just me.

Like KarTuneMan said. It will depend on the vehicle type. Some will disarm when you unlock while other will need a single pulse to the disarm wire. Let us know the year, model and make is your car we will tell you what your need to disarm it.

-------------
Be careful whose advice you buy, but be patient with those who supply it.posted_image


Print Page | Close Window