I just got the viper 160 I had a few questions about the wiring since it didn't come with a manual. I found this wiring a diagram and was wondering if it is correct. Here is the diagram:
Primary Harness
Orange - (-) 500mA Armed Output
White - Selectable Light Flash Output
WHITE/ Blue - (-) Remote Start Activation Input
BLACK/ White - (-)200mA Domelight Supervision Output
unused -
Blue -(-) second unlock output
unused
Black - Ground input
unused
Brown - (-)Horn Honk output
Red - Constant 12 volt input
RED / White - (-)200mA Channel 2 Validity Output
Heavy Gauge Relay Wiring
Purple - Starter output to Starter Side
Green - Starter input from Key side
Red - High current 12v input
Pink - Output to ignition circuit
RED / white - High current 12v input
Pink/white - Output to second ignition/accessory circuit
Auxiliary Harness (H2)
Violet/black - (-) Channel 4 output
GREEN / WHITE - (-) Factory Rearm output
Gray/black - (-) wait to start input
Light GREEN/ black - (-) Factory Disarm
Remote Start Harness (h3)
Blue/white - (-)200mA 2nd status/ rear defogger - latched/pulsed
Gray - (-) Hoodpin shutdown
Brown - (+) Brake Shutdown wire
Violet/black - tach input
BLACK/ white - (-) neutral safety switch input
Door Lock Harness
Green - (-) Lock, (+) Unlock
no function
Blue - (+)lock, (-) Unlock
Remote Start Aux. Harness
Blue - (-)200mA Status Output
Orange - (-)200mA Accessory Relay trigger
Pink - (-)200mA Ignition relay trigger
Purple - (-)200mA Starter relay trigger
go to the down load section to find the install guide for the owners
click here need any more help jsut ask
That would work but you have to be a dealer in order to get the install manual.
sorry on this site we a section that were we can upload install and owners guides. look over to the left
or click here as for owners manurals dont need to be a dealer.
I already checked that and there is no install manual for the 160.
here
its there when i saw your post i uplaod it then responded to your post