remote start wiring diagram

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82759
Printed Date: July 07, 2025 at 1:44 PM

Topic: remote start wiring diagram

Posted By: jezzabelle526
Subject: remote start wiring diagram
Date Posted: September 11, 2006 at 8:48 PM

I am purchasing a new car and want my remote start transfered to that car. All I know about my remote starter is that it is a Viper. The mechanic installing it needs the wiring information in order to install it. Is there any way to get this information without knowing the model of my remote starter?

Replies:

Posted By: thepencil
Date Posted: September 11, 2006 at 9:44 PM

A picture is worth a thousand words or some sort of number from the unit would help, otherwise probably not. You may want to find Viper dealer in your area who has a bit of time to spare and lots of kindness to look it up for you.

Economic 101, opportunity cost.

Have you consider buying a new remote starter unit for your NEW CAR instead of uning an old unit that may break down sooner than a newer one? Just a thought.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: captainzab
Date Posted: September 12, 2006 at 4:23 PM

ill guess its the viper 130xv.
Second guess would be 160xv.

A description of the remote could also help.

-------------
Note: You Always Dont Get What You Pay For.