Which unit should I get?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=82856
Printed Date: May 02, 2025 at 1:45 AM

Topic: Which unit should I get?

Posted By: hasnanajmal
Subject: Which unit should I get?
Date Posted: September 14, 2006 at 12:03 AM

Hell everyone, im a new installer and im trying to instal a remote car starter on my 2001 mitsubishi eclipse. Now my vehicle has a transponder system. I have a PASS4 bypass module which i bought today only to find out the Ultra Start unit that i have doesnt support it. Is the PASS4 universal and will it work with any vehicle? Which remote start unit should i get and which transponder bypass module to complete my installation? some links will be helpful. I have done some installations in the past on other vehicles without the transponder. Someone please help me in deciding what to buy. IM looking for long range remote starters as well as 2 way pagers that will work with the transponder in the vehicle. If you're a dealer I will gladly give you business. Thanks everyone

Replies:

Posted By: KarTuneMan
Date Posted: September 14, 2006 at 12:36 AM

How is it that the Ultrastart is "not compatable" with the PASS 4

-------------

Posted By: Velocity Motors
Date Posted: September 14, 2006 at 8:47 AM

You will have to hard wire the power connections of the PASS4 to the Ultra Start. The bypass modules are all universal application as long as the remote starter has a ground when running wire to activate the bypass module under remote start.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: hasnanajmal
Date Posted: September 14, 2006 at 10:45 AM

Not compatible meaning that there is no room to put the wires for the PASS4 on the ultrastart. Or is it that I take some extra wires from the Ultra Start unit and put it on the PASS4? if thats the case then which wires do i take from the ultrastart and connect to the PASS4?