2005 mazda 3 factory alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83004
Printed Date: July 13, 2025 at 6:27 PM
Topic: 2005 mazda 3 factory alarm
Posted By: tech519
Subject: 2005 mazda 3 factory alarm
Date Posted: September 17, 2006 at 4:33 PM
Looking for info to disable factory alarm. I have a basic remote start installed which worked fine for 2 weeks but now sets off the factory alarm when used.I previously had momentarilly jumped 12 volts to the disarm wire (BLACK/ White drivers kick panel harness)and this seemed to do the trick but the girlfrien pressed "all the button" in who knows what sequence and now I'm back to square one.Any ideas appreciated!Thanks in advance
Replies:
Posted By: KarTuneMan
Date Posted: September 17, 2006 at 5:38 PM
| FACTORY ARM | BLACK/ Blue | In driver's kickpanel | - | | | | These Wires also control Doorlocks. Disarm/Unlock will require a double pulse. |
| | FACTORY DISARM | BLACK/ White | In driver's kickpanel | - | | | | These Wires also control Doorlocks. Disarm/Unlock will require a double pulse. |
|
-------------
Posted By: tech519
Date Posted: September 17, 2006 at 5:46 PM
I understand that...I'm looking for disarm no unlock
Posted By: sparkie
Date Posted: September 17, 2006 at 7:36 PM
The first short pulse on the BLACK/ white wire will disarm and the second will unlock the doors. You can also try activating the key sense wire (RED / black) during remote start to disarm the alarm.
-------------
sparky
|