86 Mustang GT Conv power lcks/windows
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83107
Printed Date: May 12, 2025 at 8:20 PM
Topic: 86 Mustang GT Conv power lcks/windows
Posted By: davsch
Subject: 86 Mustang GT Conv power lcks/windows
Date Posted: September 19, 2006 at 5:38 PM
I have an 86 Mustang GT convertible with no power lock/doors. I have purchased 1993 doors with all power. Does the 86 have the connectors for the locks and windows preinstalled in the kick panels? I hunted around and couldn't find any unused connectors. I may be looking in the wrong place. Thanks.
-------------
Dave S
Replies:
Posted By: captainzab
Date Posted: September 19, 2006 at 11:32 PM
If the car never had factory lock and windows when it came off the factory, then most likely it never had the wire for it to begin with.
You could always go with aftermarket doorlocks and windows. But if you already got your power lock actuators and power window motor and regulator. And you know that you can get it to fit. go ahead.
All you would need to do is get some relays to power the locks and windows.
Look under relay for help on wiring relays for adding actuaotrs.
Not sure about the power window. I say get the 530T from dei so you can get one touch up and down.
-------------
Note: You Always Dont Get What You Pay For.
|