How would I identify this command start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83156
Printed Date: May 02, 2025 at 6:21 PM

Topic: How would I identify this command start

Posted By: undersc0re
Subject: How would I identify this command start
Date Posted: September 20, 2006 at 6:29 PM

I pulled out my command start unit after grounding out the temp sensor and realizing the thing works! The thing is I did not get a remote with it when I aquired the vehicle. Now I openned it up and wrote down some numbers I found but I do not see a model number. If someone could help me that would be great! This is what I found KIL 500A3 I also found 500A3 component, and command start 1997, and a square chip near the middle with a white sticker on it that says, 245 SW00 V1.0. The serial number on this unit is *S011282464*. Thanks.

Replies:

Posted By: ck auto
Date Posted: September 21, 2006 at 9:52 PM

command start went out of buisness a couple of years ago what part of canada are you in i might be able to help you out

-------------
good luck
kirk

Posted By: undersc0re
Date Posted: September 22, 2006 at 5:20 AM

I am in Winnipeg, I might have someone with an old remote from a junked truck that might work, I will find out next week. Other than that I can't find one online yet....I am watching ebay though....LOL. I noticed a 555 remote is the most common so I would assume I need that one.

Posted By: ck auto
Date Posted: September 22, 2006 at 7:32 PM

certified radio in edmonton 780-433-3191 sell replacements about $50

-------------
good luck
kirk