Print Page | Close Window

One aux channel controlling 2 devices

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83158
Printed Date: May 03, 2025 at 6:44 AM


Topic: One aux channel controlling 2 devices

Posted By: Raymond4646
Subject: One aux channel controlling 2 devices
Date Posted: September 20, 2006 at 8:34 PM

I want to open my windows (530t) and sunroof (529t) with only one aux channel.  So should my relay look like this to boost the output of the - 250ma aux channel:

85 - negative input 250ma from security system

86 - 12volts fused

87 - ground

30 - negative output to modules

Thank you!




Replies:

Posted By: auex
Date Posted: September 20, 2006 at 8:41 PM
Yes.

-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.



Posted By: Raymond4646
Date Posted: September 20, 2006 at 9:39 PM

auex]Y wrote:
s.

Thank you very much!!!




Posted By: JWorm
Date Posted: September 21, 2006 at 12:44 AM
I highly doubt you would need to use a relay in this application. It should be strong enough to trigger both modules. But if you want to be safe....that relay setup will work.



Posted By: Raymond4646
Date Posted: September 21, 2006 at 5:27 PM

JWorm] wrote:
highly doubt you would need to use a relay in this application. It should be strong enough to trigger both modules. But if you want to be safe....that relay setup will work.

Thanks man.  I wasn't sure how much those units actually draw.


Print Page | Close Window