ungo alarm s670

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83175
Printed Date: May 07, 2025 at 9:16 PM

Topic: ungo alarm s670

Posted By: lyon1980
Subject: ungo alarm s670
Date Posted: September 21, 2006 at 11:11 AM

i'm trying to by pass my ungo alarm s670 onboard relays so i need an alternative for the look and unlock to hook up my dei 524n door lock actuator. theres an orange wire that puts out 500ma when alarm activated i'm worried its too much and might blow out my actuators is thre a way to covert the 500ma to a 200ma or do u know of any other way around this?

-------------
lp

Replies:

Posted By: KarTuneMan
Date Posted: September 21, 2006 at 12:17 PM

More info please.....year make model.....you know! I have never heard of anyone asking this question.... The lock and unlock outputs from most products...DEI included, are used to trigger relays. If you are installing 2 wire actuators wire the realys like this.

-------------

Print Page | Close Window