Print Page | Close Window

Compustar green wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83261
Printed Date: June 06, 2024 at 11:54 AM


Topic: Compustar green wire

Posted By: saleen49
Subject: Compustar green wire
Date Posted: September 23, 2006 at 4:25 PM

The manual says on pin 7 of harness CN1 there is a green wire that hooks up to the ignition wire on the ignition harness of the vehicle. My vehicle is an 06 Ford Ranger, is this green wire to be connected to one of the three yellow +12v wires in the column?

thanks




Replies:

Posted By: iskidoo
Date Posted: September 23, 2006 at 4:35 PM
No, You need to hook it to IGNITION - LIGHT GREEN/ PURPLE (+)

-------------
Steve G



Posted By: Chris Luongo
Date Posted: September 23, 2006 at 5:18 PM
Right, the term IGNITION means that when you test the wire, it will have power in the Run AND Start positions. That's where you want to connect it.


Print Page | Close Window