06 nissan altima, door locks, data buss
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83269
Printed Date: July 09, 2025 at 7:15 PM
Topic: 06 nissan altima, door locks, data buss
Posted By: swamprat323
Subject: 06 nissan altima, door locks, data buss
Date Posted: September 23, 2006 at 7:59 PM
is this car on a data buss for door locks etc, im hearing both yes and no on the matter.
Replies:
Posted By: KarTuneMan
Date Posted: September 23, 2006 at 8:08 PM
Based off of what I have for tech support.....BOTH. Wiremagic says use the CAN SL. Astrochart shows goin into the doors.
-------------
Posted By: Chris Luongo
Date Posted: September 24, 2006 at 9:05 AM
It depends.
--If it has a factory alarm system, and BOTH front windows have the auto-down feature, it is a data system.
The key cylinder in the exterior of the front door sends ground signals to the power window switch, and then the window switch communicates to the body-control module via data.
In this case, you have three choices as to how you're going to control the locks:
1. Run wires into the door.
2. Buy a doorlock module from bypasskit.com.
3. Go to the carsound.com security forum, do a search for "nissan bcm," and you will learn a special trick.
--If it has no factory alarm, and ONLY one auto-down window, it is different. The regular lock and unlock wires run directly from the door to the BCM, and you can easily get them at the BCM, with no extra special parts.
Posted By: swamprat323
Date Posted: September 24, 2006 at 11:00 PM
thanks for that info
|