Python remote with 556SW module

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83322
Printed Date: July 05, 2025 at 5:44 AM

Topic: Python remote with 556SW module

Posted By: vpsr6
Subject: Python remote with 556SW module
Date Posted: September 25, 2006 at 9:55 AM

I have a quick question on the connection of the bypass 556SW module to my Python 1400. I think I should use the blue status wire that comes off the relay satellite module and connect it to the bypass, I assume this will trigger the bypass as soon as the remote is activated. I don't understand if DEI makes both products why they use 2 different descriptions in both sets of directions.