trunk trigger false alarm
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83523
Printed Date: May 17, 2024 at 5:43 AM
Topic: trunk trigger false alarm
Posted By: bigjeff42
Subject: trunk trigger false alarm
Date Posted: September 29, 2006 at 9:55 PM
2000 mustang gt (-) trunk trigger keeps falsing my alarm......i put a diode in with the cathode side on the GEM side of the wire...........how can i keep trunk protect w/o it falsing...........its a 771 alarm
Replies:
Posted By: bsd1
Date Posted: September 30, 2006 at 2:53 AM
1) You need more than 1 diode
2) Isolate the problem and make it simple. Simply give your trunk a dedicated trigger and don't share it with your doors or anything else
You really answer your question, you've got to give far more details. If you can't write, please draw out a diagram.
Posted By: cntrylvr79
Date Posted: September 30, 2006 at 7:26 AM
Your diode is backwards. The cathode is supposed to go on the side away from the gem. You also want to make sure the trunk trigger from the alarm is connected to the same side of the wire as the cathode of the diode is.
-------------
Cause I'm So white and nerdy...
First Class Certi-fried installer
Posted By: bigjeff42
Date Posted: September 30, 2006 at 11:01 PM
hey cntyslvr thanks............i did it that way and i dont got no probs.......thanks
|