APS 996A in VR4 Spyder non stop chirping

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83670
Printed Date: July 17, 2025 at 9:10 AM

Topic: APS 996A in VR4 Spyder non stop chirping

Posted By: fiasco
Subject: APS 996A in VR4 Spyder non stop chirping
Date Posted: October 04, 2006 at 12:08 AM

I have installed an APS 996A alarm in combination with a JNI Wifi remote top controller for my VR4 Spyder.

I have everything installed and when I hooked the battery back up the horn chirps repeatedly non stop. The remotes appear to do nothing and the only things that stop the chirping is turning the ignition to the ON position or disconnecting the battery.

I assume that the alarm gives error codes through chrips. Is there a guide to the error codes somewhere?

What am I doing wrong?

Replies:

Posted By: shaggy12volt
Date Posted: October 04, 2006 at 12:47 AM

I beleave you need to reprogram the remotes. https://www.audiovox.com/webapp/wcs/stores/servlet/ProductDisplay?catalogId=10001&storeId=10001&productid=1633344&langId=-1 click on find manual

-------------
The Shagmaster
1999 Chevy Suburban 15" lift sittn on 22's sets 7'5"
1992 Chevy Astro Van all Bagged out Dubbed THE SUICIDER
Installing for over 18 years Looking for empolyment NOW send PM for resum

Posted By: Chris Luongo
Date Posted: October 04, 2006 at 4:20 PM

The remotes won't work unless the antenna is installed, plugged in, and the cable isn't damaged.......I would start by checking all that.

Print Page | Close Window