DEI 556s bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83696
Printed Date: July 16, 2025 at 6:59 AM

Topic: DEI 556s bypass

Posted By: dasbogie
Subject: DEI 556s bypass
Date Posted: October 04, 2006 at 4:07 PM

I've installed a python 881xp in my 06 F150 supercrew. I've remote started it a couple times now with the key in the ignition. I have power and a solid ground to the 556s module and connected the status wire to the 2nd status of the 881. Followed the instructions in the manual and have had no luck. Is there a trick to these things or do I need to connect the status wire to something else? Any suggestions or help is much appreciated. Thanks

Replies:

Posted By: kgerry
Date Posted: October 04, 2006 at 6:22 PM

did you learn the module?

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: dasbogie
Date Posted: October 04, 2006 at 7:24 PM

I have made my connections put the key in and turn to run. The led doesn't light up like it says it's supposed to.

Posted By: kgerry
Date Posted: October 05, 2006 at 3:49 PM

and you tried learning it with BOTH keys?

you're saying the security light in your cluster doesn't light up? (because there is no LED on the module at all)

also, make sure you connect to the "true" status wire the Blue one on the 4 pin plug and NOT the Blue/white second status output.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979

Posted By: dasbogie
Date Posted: October 05, 2006 at 10:20 PM

Currently It's connected to the 2nd status blue/white but i did try the solid blue on the 4 pin just to see if that would make a difference and sure enough it didn't . I was even going to tap into the blue wire in the ribbon harness to see if it would work that way but didn't try it yet.

Posted By: shaip99
Date Posted: October 09, 2006 at 5:42 AM

try putting the key in the ignition just in the cylinder not in the on position and remote starting the unit this way you ca at least be sure it is the 556s unit

-------------
"Computer games don't affect kids, I mean if Pac Man affected us as kids, we'd
all run around in a darkened room munching pills and listening to repetitive
music."-Kristian Wilson, Nintendo Inc.