Print Page | Close Window

Automate wiring

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83733
Printed Date: June 13, 2024 at 10:34 PM


Topic: Automate wiring

Posted By: georgedal
Subject: Automate wiring
Date Posted: October 05, 2006 at 12:17 PM

I have an Automate security system by Directed. Model: EZSDE 1490. Does anyone have the installation instructions (not the operating instructions)?
The system has an ignition cutoff. I would like to know if any of the cars' wiring has to be cut and run through the control module - instead of just taped into the car wires.



Replies:

Posted By: captainzab
Date Posted: October 05, 2006 at 3:09 PM
go to download section and use any DEI diagram like viper, wire colors are gonna be the same throughout
read the basic on secuirty on this site so you know which wires you need

-------------
Note: You Always Dont Get What You Pay For.




Print Page | Close Window