Adding a proxomity sensor 508D

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83826
Printed Date: May 10, 2024 at 6:56 AM

Topic: Adding a proxomity sensor 508D

Posted By: cleanz32
Subject: Adding a proxomity sensor 508D
Date Posted: October 07, 2006 at 7:58 AM

I am trying to add a proximity sensor to my truck. It has a Audiovox 901 Alarm. I added a glass sensor and window controls but this proximity sensor I am not sure on how to install it, it is a viper 508D. It requires wires for a 12v, ground, first stage output and second stage trigger out out. The second stage is a blue(-) wire but I do not think I really need this. What I do need help with is the first stage wire. Its a green(-) wire.

Please let me know where I need to connect this wire too.

theres a BROWN / black horn output(-). purple positive door trigger. green negative door trigger. brown siren output(+). orange armed output(-).

If you need more info to help me, please let me know. its for a 04 dodge dakota

Replies:

Posted By: cleanz32
Date Posted: October 07, 2006 at 6:52 PM

Thank you, I will have to try that.

Posted By: graysand3220
Date Posted: October 07, 2006 at 8:22 PM

that will work, but do make sure to diode isolate them. and the blue wire is not (-) its (+). it is your insant trigger. you don't need it if you just want the proximity senor to warn away. So the Blue is the inner field ( instant trigger) and the green is the outer field (warn away).

-------------
Me.

Posted By: cleanz32
Date Posted: October 12, 2006 at 11:11 PM

Well I tried the diode thing, the same way as I installed my glass sensor but except I went to the shock sensor. This cause my alarm to go off instead of just a beep when I walked by. could you explain how to wire this a little more detailed.

Posted By: cleanz32
Date Posted: October 13, 2006 at 5:26 PM

Is this the correct way to install it? because it was setting off the alarm when i walked near the truck