Print Page | Close Window

03 Murano Tach wire?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83878
Printed Date: July 07, 2025 at 7:35 PM


Topic: 03 Murano Tach wire?

Posted By: techfiftyfive
Subject: 03 Murano Tach wire?
Date Posted: October 08, 2006 at 5:48 PM

I read somewhere here that I could find it in the passenger side kick, labeled as a yellow wire. Im unable to remove the paneling on that side and I dont want to risk damaging anything neither. I want to go behind the gauges to get the signal, but does anyone know how to remove the gauges on these cars? Or remove the paneling on the passenger side? Thanks in advance.



Replies:

Posted By: KarTuneMan
Date Posted: October 08, 2006 at 11:12 PM
@ the pcm behind the glove box. white, or yellow....pick one!

-------------



Posted By: techfiftyfive
Date Posted: October 09, 2006 at 5:05 PM

Any tips on getting around back there? I tried removing the 4 screws at the very bottom of the glove, and I also removed the passenger side air vent, but still had no luck. I tried testing the yellow wire that I could see, but it wasnt giving me the correct reading.  In order to remove the glove, is it the same as like the Honda's? Push the sides of it, inwards then drop down?




Posted By: Mike M2
Date Posted: October 15, 2006 at 9:12 PM

I always go under the hood for tach...

Tachometer NOT red or black  ac  any ignition coil or fuel injector



-------------
Mike M2
Tech Manager
CS Dealer Services



Posted By: techfiftyfive
Date Posted: October 16, 2006 at 4:13 AM

I normally go behind the gauge cluster cause Im not really familiar with stuff underneath the hood. I read somewhere that the wire under the hood was yellow, and I found a yellow one, tested it, I could've sworn my meter was reading it as if it was the tach wire, but I was unable to program it. Went back to that yellow wire, my meter probably read it right, but my eyes read it wrong cause the 2nd time I metered it, it read 60.XX something.


Print Page | Close Window