07 Tahoe, Viper 5900, xk510
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83880
Printed Date: May 03, 2024 at 9:00 PM
Topic: 07 Tahoe, Viper 5900, xk510
Posted By: Strizzy23
Subject: 07 Tahoe, Viper 5900, xk510
Date Posted: October 08, 2006 at 6:43 PM
im doing a 5900 viper im got everything all done but i cant find the data wire. i think that y i cant get the xk510 to program any help thanks
Replies:
Posted By: Strizzy23
Date Posted: October 09, 2006 at 1:27 PM
i found out it the green wire but i cant program the bypass anyhelp
Posted By: Hymer
Date Posted: October 09, 2006 at 3:28 PM
Gotta bury a key in that one right... after the loops are around, just try to RS the truck... It should.. if not play with the loops... The door lock portion, wire violet to pin 1 on the odb port.. connect the harness and stick a key in the ign.. should program.. should be firmware gmdl6 1.0 if it doon't work try re-flashing iit...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Strizzy23
Date Posted: October 09, 2006 at 3:40 PM
i will try that the obd2 wire is green i will try what you said and let you know the what happen thanks for the info
Posted By: Hymer
Date Posted: October 09, 2006 at 3:46 PM
no prob, any more help just yell!
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Strizzy23
Date Posted: October 09, 2006 at 6:29 PM
i try that but no lock programing it so im going to call the tech up in the am. do you know y i have no starter kill i cut the starter wire and put the 1300 resitor in to the starter side and when it is arms it will start but the alarm will go off thanks Dave
Posted By: Hymer
Date Posted: October 09, 2006 at 10:05 PM
Sorry, but I'm unframilar with the viper [dei stuff] nd don't have my data base on this PC... sounds like somthng is aray.. I've always done a hybrid tx bypass and a door lock disarm bypass on these. [cost more but works better... ] After a lucern I did , I just removed the resistor and the hybrid bypass worked great... the one with the key... well I havnt had the best of luck with.... I'll be back on in the am, so give me a shout...
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
Posted By: Strizzy23
Date Posted: October 10, 2006 at 9:30 AM
they sent me the wrong firmware for the bypass kit from what i under stand is that there is the all in one xk510 that will loose a key but you dont want to loose a key you can used the xk06 for the key and the xk01 for the locks and everything else thanks for the help Dave
Posted By: Hymer
Date Posted: October 10, 2006 at 9:41 AM
Exactly!.... much better choice... good luck....
-------------
Tire Proz Stillwater Mn
High End Restyling and Comlete Repair
|