Firewall 1995 Honda accord

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=83910
Printed Date: July 06, 2025 at 10:38 AM

Topic: Firewall 1995 Honda accord

Posted By: jkaneg31
Subject: Firewall 1995 Honda accord
Date Posted: October 09, 2006 at 12:23 PM

I was wondering where is the best place to go through the firewall on a 1995 Honda Accord 4 Door ex sedan?

Thanks
Parrothead

Replies:

Posted By: Demolitionbmx
Date Posted: October 09, 2006 at 9:07 PM

What are you putting in? Power cable im assuming. On my car(92 Prelude) and a couple other hondas, I've noticed a gromet not being used when the passenger side junction block is removed by the firewall. There are only a couple bolts securing it down and routing the power cable or any cables is simple and clean. Its just a little easier with a gromet already there. Its not on all of them but ive seen them on a couple. Worth a check at least.

Posted By: jkaneg31
Date Posted: October 12, 2006 at 11:01 AM

a power wire, and some alarm accsessories. i want to try and keep the power wire separate from the others though. Thanks for your reply

Posted By: cavsfan
Date Posted: October 12, 2006 at 12:20 PM

5 speed or automatic??

Posted By: captainzab
Date Posted: October 12, 2006 at 6:06 PM

driver side, all the way up top to left.

-------------
Note: You Always Dont Get What You Pay For.

Posted By: jkaneg31
Date Posted: October 15, 2006 at 5:29 PM

automatic. i can use where the clutch would go through I was more or less looking for something on the passenger side thanks for all your replies

Print Page | Close Window