ford superduty, remote start
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84118
Printed Date: July 05, 2025 at 7:55 PM
Topic: ford superduty, remote start
Posted By: fastgracey
Subject: ford superduty, remote start
Date Posted: October 14, 2006 at 10:36 AM
Anyway here is the story I am installind a bunch of remotestart/alarms prostar 3300's on the work trucks ford superduty's and chevy/gms 2500's all diesels.I am working on chevy.First the door lock unlock output doesnt work then when you turn the key to run position the truck starts bucking and trying to start.Then I had key in ign on run position so system would not keep rearming then I shut door but it was locked so I go get spare key put into doorlock and turn to unlock and freaking truck starts.Iam lost I have no clue but here is what I found all my ign/power wires are correct and I get right readings as well as with all triggers for hood switch ,lights horn etc when all is unplugged fron alarm.But when plugged in they get goofy like ign 1 output stayes on constant.Also this unit looks for tach sense wire needing 1-6 volts AC to program tach function is no wait to start wire on unit. was getting 7 volts then saw 12 dc.also lights dont flash right and wont go into valet I think I have fried 2 of them.Anywasys I figure I will order new system and in the meantime wire up the passlock module from DEI 457gw when I read instructions it says very bluntly do not connect to dash frame for ground you have to go to drivers kick panel to get a ground.Why is this and is this somehow running power through backfeeding all my modules burning them up and also freaking truck out i am lost
Replies:
Posted By: h2oskierfl
Date Posted: October 14, 2006 at 11:06 AM
Vehicle Info please. Are you using the 457GW for the locks also? Depenging on the truck info, the locks may be part of the data bus system.
Posted By: fastgracey
Date Posted: October 14, 2006 at 11:07 AM
where else can I get tach sense wire for 2006 ford diesel besides under dash at WHITE/ grn wire I need to get between 1-6 vlots AC AT IDLE AND RAISE WHEN GAS PEDAL IS STEPPED ON for the remote start system but only seeing .5 volts AC
Posted By: fastgracey
Date Posted: October 14, 2006 at 11:19 AM
I am putting in a pro start 3300 remote start alarm iam trying to hook up dome light but it says to use door trigger on truck diagram I have but the diagram only gives me the positive door trigger and the dome light is a negitive so I need to know what color is the negitive trigger
|