Print Page | Close Window

Emina Estima 1993 alarm remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84192
Printed Date: July 06, 2025 at 11:06 AM


Topic: Emina Estima 1993 alarm remote start

Posted By: malalaraf
Subject: Emina Estima 1993 alarm remote start
Date Posted: October 16, 2006 at 8:44 AM

Hi

I'm trying to fit car alarm in that car. Alarm i think it's no name. Only on the box is writtem "Auto Guard".  Car is Toyota Estima TD. Car has no immobiliser.

https://i69.photobucket.com/albums/i46/malalaraf/alarm-scheme.jpg

sorry, the best what i could do with picture.

Problem:

When i connected like on scheme after then i started engine with key, engine was working(even when i took the key off) untill i connected "0" to brown wire from far right relay.  after i joined together two brown wires from far right relay and connected them to "87b" in that relay. Right now it's ok but when i try to do remote start, engine is starting and and after 2-3 sec going off and again 3 times. Appart anti-hijacking is not cutting off engine.

Yellow wire from relay under ACC connected to yellow from main unit.

White wire from main unit connected to tom ACC(blue wire)

i only cut one wire (STR) like on scheme. any other wires i joined to existing.

Plz, can anyone help. I can't really find any electrical schemes of Toyota Emina on internet.

Thx in advance




Replies:

Posted By: malalaraf
Date Posted: October 16, 2006 at 8:48 AM

car is automatic, maybe it's helpfull




Posted By: malalaraf
Date Posted: October 16, 2006 at 12:57 PM

O'k. I connected brown wire to +12V and remote start it's working nice. BTW brown wire is described like "Gasbne Directing light". What's that stad for?

But still anti-hijacking is not cutting off engine. It's not working. i mean everything is working, just not cutting off engine.


Print Page | Close Window