2000 Silhouette Passkey III module
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84380
Printed Date: April 28, 2024 at 9:22 PM
Topic: 2000 Silhouette Passkey III module
Posted By: beetlebailey
Subject: 2000 Silhouette Passkey III module
Date Posted: October 20, 2006 at 10:24 AM
I have puchased a Directed 555G Passkey III module, I was looking at the wiring diagram yesterday and it look's pretty straight forward except I am wondering about one wire hook up. The direction shows the following; Pink/black- Ignition (key side) Purple -Data In/Out Pink -Ignition (ECM Side) Black -Ground Red- +12 Volt Constant Green - Key Sense I have the colors for everything except for the Green - key Sense can any one help me with that color for a 2000 OLDS SILHOUETTE? Thanks ------------- sheldon
Replies:
Posted By: cavsfan
Date Posted: October 20, 2006 at 10:42 AM
It is in the bundle of wires in the ign harness, thin lt. green wire. Shows 12v when the key is inserted it sows 0v.
Posted By: beetlebailey
Date Posted: October 20, 2006 at 10:56 AM
So it shows 0 volts when the key is not in and 12 Volts when the key is in? Thanks for the Reply  ------------- sheldon
Posted By: cavsfan
Date Posted: October 20, 2006 at 11:02 AM
12V then 0v when the key is inserted.
Posted By: beetlebailey
Date Posted: October 20, 2006 at 11:42 AM
Aw yes that works for me, hope to start this project this weekend and better bring my laptop with as I think I will have more questions. I am not a novice at these but I am not a pro either so it nice to have the extra help. Thanks again. ------------- sheldon
Posted By: xtremej
Date Posted: October 20, 2006 at 11:58 AM
Pretty easy to install on, I use the GMBP ignition bypass. I had the 555g trigger a security light on a montana which is the same platform as the silhouette.
-------------
Posted By: beetlebailey
Date Posted: October 20, 2006 at 12:12 PM
so you did not wire the bypass into the ignition area?
-------------
sheldon
Posted By: xtremej
Date Posted: October 20, 2006 at 1:24 PM
Correct it works through the data wire in the diagnositc plug (purple wire)
-------------
Posted By: 05gt
Date Posted: October 20, 2006 at 1:29 PM
I use the GM-SL for that vehicle, very straight forward, and easy to program, also taps into the data wire of the vehicle, no need for key sense or anything like that
Posted By: beetlebailey
Date Posted: October 24, 2006 at 9:52 PM
Ok I just picked up my remote start unit Aolin AL-838SR, I am looking at the wiring diagram (not very good) and here is my first question (not my last one either)I have a yellow tracer wire that goes to a relay to the ignition coil and a Red tracer that goes to another relay to the fuel pump, these also conntect to (2) Brown tracer wires out of the unit, which all so connects to the "ON" on my key switch. Keeping in mind that this will be installed in a 2000 oldsmobile silhouette, I thinking that these wires do not need to be installed I figured that I don't have a "ON" on my key but I do have "OFF, ACC & Start". I know this might not make sense (I could put the diagram on here) but I am trying to work this out before jumping in. Am I right? ------------- sheldon
Posted By: Velocity Motors
Date Posted: October 25, 2006 at 10:19 PM
Post the wire diagram so it helps us understand what it says better.
-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
Posted By: beetlebailey
Date Posted: October 26, 2006 at 7:29 AM
I will post the diagram as soon as I get home. Thanks ------------- sheldon
Posted By: beetlebailey
Date Posted: November 11, 2006 at 7:52 PM
Well I did not post the diagram for this unit as I ended up uninstalling the unit and sold it the very next day! I did not like the operation of the unit itself but an nice unit none the less, so I purchased a ProStart CT-3400 (TW) two-way remote unit from Canadain Tire and after 2 hours and some quick reading, I got the unit installed no problems (just read the manual before install, the programing needs to be done). Thanks to everyone that help me along in this process ------------- sheldon
|