97 jeep grand cherokee remote start

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84417
Printed Date: May 15, 2025 at 9:05 PM

Topic: 97 jeep grand cherokee remote start

Posted By: xtremej
Subject: 97 jeep grand cherokee remote start
Date Posted: October 21, 2006 at 11:07 AM

Whew,
I am installing a remote start on this vehicle, I removed the gauge cluster to grab a tach lead, the plug for the cluster is mounted in the dash so it unplugged as i removed it. i reinstalled it and now when I start it up it revs to 3000 rpms and stays there until I shut it off...... Sorry for the run on I am alittle shook on this. Any ideas at all? I have disconnected the battery for now hopefully this will help:errr:

-------------

Replies:

Posted By: xtremej
Date Posted: October 21, 2006 at 11:41 AM

Problem computer was not seeing rpm's, reset by disconnect the battery for 10-12 min. According to chrysler tech this allows something in the pcm and ecm to link up and communicate?

-------------

Print Page | Close Window