Interior lights

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84494
Printed Date: May 09, 2025 at 9:03 PM

Topic: Interior lights

Posted By: vpsr6
Subject: Interior lights
Date Posted: October 23, 2006 at 8:35 AM

I just installed a Python 1400 in my '05 F150 XLT. I thought the interior lights were triggered off of the door locks but apparently not. I have read some conflicting posts about the dome light supervision output from the Python. Can I connect it directly to the blk/blu dome light supervision in the truck? or do I need a relay? Any info would be helpful.

Replies:

Posted By: genehewett
Date Posted: October 23, 2006 at 11:12 AM

If you cant measure the current required to activate the circuit then you should use a relay.

Posted By: vpsr6
Date Posted: October 23, 2006 at 3:33 PM

It looks like the output from the Python is 200ma on the dome control, so I guess I need to cut the blk/blu dome wire in the truck and measure the current drawn when all the light are on??

Print Page | Close Window