Print Page | Close Window

Dei 451m

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8466
Printed Date: August 14, 2025 at 6:41 PM


Topic: Dei 451m

Posted By: Pufferking
Subject: Dei 451m
Date Posted: January 22, 2003 at 6:58 PM

I just bought the dei 451m mio doorlock relay module today and need some help.I have aftermarke-door actuator's will i still need two relays when i hook up my actuators to my alarm so when i arm and disarm the doors lock and unlock.

Thanks




Replies:

Posted By: auex
Date Posted: January 22, 2003 at 7:10 PM

Nope the 451M will do just fine.  All you have to do is ground the brown and white wires.  The blue will be your unlock wire and the green will be your lock wire.  The purple wire will go to constant +12V.  If you don't have a dei alarm then the small red will go to +12V( ground if the alarm supplies a +12V output for the locking circuit) and the small blue goes to unlock from the alarm and the small green goes to the lock output.



-------------
Certified Security Specialist
Always check info with a digital multimeter.
I promise to be good.
Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.


Print Page | Close Window