Proximity Sensor Bypass

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8472
Printed Date: August 14, 2025 at 10:35 PM

Topic: Proximity Sensor Bypass

Posted By: Mohamad
Subject: Proximity Sensor Bypass
Date Posted: January 22, 2003 at 9:26 PM

I've got a Viper 600ESP with the 508D Proximity Sensor installed on my Honda and it all works fine. I'm thinking of putting in a bypass for the Proximity Sensor because it seems to irritate the hell out of the bystanders when I park along a busy street.

For now, I've set the external zone to be as close as I can get it, and with that it is only activated close to the doors but I loose sensitivity at the front and rear of the car. Has anyone ever connected a bybass switch to turn off the sensor in busy areas? Is it as easy as just cutting teh power form the unit?

Thanks heaps

Replies:

Posted By: 10nesne1
Date Posted: January 22, 2003 at 9:57 PM

That's easy....... there are four wires. Red is 12v+, Black is ground, Blue and Green are sensor inputs. You can cut the red or black wire and connect it to a on off switch.

Posted By: Mohamad
Date Posted: January 22, 2003 at 10:12 PM

10nesne1,

Thanks man .... suspected it could be that easy, but I got the shop to set it up and was not too sure if they wired it by teh book. WIll give it a try.

Cheers