Print Page | Close Window

door lock stopped working

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=84813
Printed Date: May 12, 2025 at 11:58 PM


Topic: door lock stopped working

Posted By: scott1234515
Subject: door lock stopped working
Date Posted: October 29, 2006 at 1:25 PM

I installed a python 3000esp and it has been working great for about 3 weeks. today the door locks stopped working when i use the remote to arm or disarm. i checked the wiring and fuses.... any thoughts?

Scott



-------------
Scott C



Replies:

Posted By: seed854
Date Posted: October 29, 2006 at 8:35 PM
Are the door locks factory or aftermarket??

-------------
Steve



Posted By: scott1234515
Date Posted: October 30, 2006 at 10:42 AM

Thanks for replying... Factory installed door locks on a 2002 kia rio....

Scott



-------------
Scott C



Posted By: seed854
Date Posted: October 30, 2006 at 4:01 PM
Are you still getting an out put from the alarm brain? Check to make sure that you are still getting an output from the brain. Let me know.

-------------
Steve



Posted By: scott1234515
Date Posted: October 30, 2006 at 4:49 PM

I used a 12 volt tester and placed it on the brain outputs testing them individually as I clicked the remote.

I got no light on the tester.

S



-------------
Scott C



Posted By: seed854
Date Posted: October 30, 2006 at 5:22 PM
Your outputs on your alarm should be negative output, which means you need to connect your tester to 12 volts then test the outputs. It should then light up when you click your remote. Try that. If you are not getting an outputs its possible you have a bad brain.

-------------
Steve


Print Page | Close Window