05 magnum no relay needed for 2ndstart
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85033
Printed Date: May 01, 2025 at 12:44 PM
Topic: 05 magnum no relay needed for 2ndstart
Posted By: mxxmikexx
Subject: 05 magnum no relay needed for 2ndstart
Date Posted: November 02, 2006 at 6:14 PM
I read someone elses post about not needing to add a relay and resistor for the 2nd start wire when using the audiovox remote starters, you can just use the negative pulse while cranking wire in the 4pin harness from the unit and hook it directly up to the vehicles 2nd start wire and it works fine. So today I tested that theory and it does work fine this will save some extra time at the end of the day when im benching tons of installs all winter long. the transistor output must be close enuff to the 180 ohm resistance the car is looking for to make it work.
-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106
Replies:
Posted By: Chris Luongo
Date Posted: November 02, 2006 at 11:52 PM
Yeah, it definitely saves a lot of time. We do the same where I work.
Those cars will also work out fine without any second-starter connected at all. But it sure can't hurt to quickly hook up that BLACK / YELLOW from the Audiovox just to be safe.
|