Viper 5900 in 97 Tacoma
Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85099
Printed Date: May 11, 2024 at 2:21 AM
Topic: Viper 5900 in 97 Tacoma
Posted By: faded808
Subject: Viper 5900 in 97 Tacoma
Date Posted: November 03, 2006 at 11:42 PM
I am gonna install a Viper 5900 remote start on my friends tacoma and wanted to know some things... Its a 97 Toyota Tacoma 2wd Automatic.... 1. What wire do I cut/splice in to for the neutral saftey switch? 2. What Kind of door locks are they, Like do I need 2 relays to use the power door locks??
Replies:
Posted By: faded808
Date Posted: November 04, 2006 at 1:05 AM
Also would there be anything else I should buy to Make the alarm work?? like any bypass moduels or anything, My friend told me that these cars had an alarm in them or is it just a keyless entry thing??
Posted By: Mike M2
Date Posted: November 04, 2006 at 8:58 AM
The locks are negative pulse, RED / white and RED / yellow, in the drivers kickpanel. No relays needed. No neutral safety switch needed either for an automatic. No bypass, Tacoma's didn't need them until 06. If it has an alarm, it's either aftermarket or dealer installed. There was no alarm option in 97...
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: faded808
Date Posted: November 04, 2006 at 11:58 AM
ok kool,
For the door locks no relays needed just tap in to it an it will work without a relay??
So how would I go and install the remote start?
Also I dunno but there is a red ststues led on his steering column and I guess it is a factory installed alarm, so how would I go and bypass it if it is??
Posted By: xtremej
Date Posted: November 04, 2006 at 12:53 PM
Nope don't need relays for the door locks. If it has a dealer installed alarm the only sure way to find out what is, is to find the brain in the dash somewhere. Follow the wires from the led and they lead to it. Get the model number and make of it and I am sure someone will have some info on it. Print off a diagram of this truck and remember to verify what a wire is before connecting it, they are pretty straight forward to install a remote start on.
-------------
Posted By: Mike M2
Date Posted: November 04, 2006 at 1:39 PM
Honestly, if you are installing an alarm/RS combo the best thing to do is just remove the dealer installed alarm....
-------------
Mike M2
Tech Manager
CS Dealer Services
Posted By: faded808
Date Posted: November 04, 2006 at 3:24 PM
yea im gonna do that remove the dealer installed alarm..... I checked under the dash on my friends truck and its like an open space ther, were would be a good place tp mount the brain at I was thinking behind the readio or some thing??
Posted By: faded808
Date Posted: November 05, 2006 at 12:48 AM
Ok I have question, umm when the car is on i try to lock the doors but the locks would automaticly unlock, does that mean that it has a keyless entry system??
Posted By: mustangfoo
Date Posted: November 05, 2006 at 2:52 AM
faded808 wrote:
ok kool,
So how would I go and install the remote start?
if you don't know about remote start and how to install it, I suggest that you have a professional do it. Best advice for ya.
Posted By: xtremeaudio
Date Posted: November 05, 2006 at 4:16 AM
on viper alarm all you put BLACK/ white wire to (-) you dont needneutral saftey switch it will work with all toyota
Posted By: Mike M2
Date Posted: November 05, 2006 at 8:47 AM
faded808 wrote:
Ok I have question, umm when the car is on i try to lock the doors but the locks would automaticly unlock, does that mean that it has a keyless entry system??
No it doesn't. I'm pretty sure factory keyless wasn't even an option back then.... ------------- Mike M2
Tech Manager
CS Dealer Services
Posted By: faded808
Date Posted: November 05, 2006 at 6:16 PM
mustangfoo - by the way I installed the same alarm on my 87 mustang two weeks ago and its a 5spd and been working great...
I was asking how to do a remote start on an AUTO because its different from a 5spd.
Posted By: faded808
Date Posted: November 05, 2006 at 6:18 PM
OK I have everything hooked up and all but dont know how to wire the toggal switch for the NSS?? do I just hook the toggal switch to the NSS wire form the alarm than ground that??
Posted By: faded808
Date Posted: November 05, 2006 at 6:48 PM
ok nevermind got it to work already....
|