how to reset remote of compustar

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85106
Printed Date: May 07, 2025 at 7:12 AM

Topic: how to reset remote of compustar

Posted By: LONELYSTAR6000
Subject: how to reset remote of compustar
Date Posted: November 04, 2006 at 2:03 AM

I have poblem with remote of compustar

i have old remote 2 ways with my truck

i take the old one to program with my car and working good

and i use the new 2 ways to program with my truck work ok

but the poblem is my old remote work on both car and truck

when i lock or unlock both vehicle work same time

any one konw how to reset my remote to work with one vhiecle only

thank you

Replies:

Posted By: Velocity Motors
Date Posted: November 04, 2006 at 7:39 AM

Make sure that when you learn a new transmitter, your not in range of the other vehicle. Start with your truck and relearn the remote control that you want to have controlling the truck. Now that you have done this, take the other remote control that you have and relearn it to the car. The remote controls will now be learned to each repective CPU and will not have the same code.

-------------
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Posted By: pens
Date Posted: November 07, 2006 at 12:53 AM

has anyone installed a compustar cm4200 starter in a chev, if so i need some info on installing

the supplied relay.

-------------
cw

Posted By: LONELYSTAR6000
Date Posted: November 22, 2006 at 11:29 PM

thank you Jeff
i will try it

Print Page | Close Window