Print Page | Close Window

indicator problem on audi a3

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85109
Printed Date: May 07, 2025 at 11:57 PM


Topic: indicator problem on audi a3

Posted By: scottlock
Subject: indicator problem on audi a3
Date Posted: November 04, 2006 at 4:37 AM

i am fitting a microscan 211 for a friend of a friend onto his audi a3 this morning and have a problem, i was testing the indicator (mac tester) feeds at the stalk the blk/wh tested fine but as i touched the blk/gre the indicators just stopped working altogether, i have checked all the fuses they are all fine,i didn't short anything, hazards do not work either, please help im pulling all my hair out :errr:

cheers



-------------
scottlock



Replies:

Posted By: ferretvw
Date Posted: November 04, 2006 at 11:38 PM
possibly fried the turn signal relay normally at or near the fuse box normally just pulls out and can be changed

-------------
2008 Scion xB
Pioneer AVIC-D3
RF 3Sixty.2 sound processor
Stock speakers (for now ;))


Print Page | Close Window