2000 Honda Passport 4WD

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85129
Printed Date: May 14, 2025 at 7:40 AM

Topic: 2000 Honda Passport 4WD

Posted By: rekon
Subject: 2000 Honda Passport 4WD
Date Posted: November 04, 2006 at 4:05 PM

Hello all...

Once again I am running into a basic question that I cannot find the direct answer to on the internet. My mom just recently bought herself a used 2000 Honda Passport and had me purchase a remote start unit for her. I cannot for the life of me figure out what type of antitheft / immobilizer system is used in this vehicle. I've looked at DEI's line up of anti theft system bypasses but their aren't any that mention being used on a 2000 Honda

I've browsed all through this website but still nothing. They don't even list a Passport in their reference tables.

The key is the type of key that would have a transponder in it but I cannot find any concrete information regarding this... Anyone ever do a remote start install in a Passport or does anyone know what type of bypass I need to use, if any at all?

Replies:

Posted By: JWorm
Date Posted: November 04, 2006 at 6:20 PM

No Immobilizer on the Passport.

12volts      white, WHITE/ black      +      ignition harness
Starter      BLACK/ white      +      ignition harness
Ignition      BLACK / YELLOW      +      ignition harness
Second Ignition      BLACK/ red      +      ignition harness
Accessory      blue      +      ignition harness

Power Lock      lt. GREEN/ red      -      DKP white 22 pin connector
Power Unlock      RED / blue      -      DKP white 22 pin connector

Parking Lights+      GREEN/ red            drivers kick in a black plug
Parking Lights-       yellow or grn/yel            steering column
Door Trigger      RED / green      -      drivers kick in a white plug
Dome Supervision      use door trigger
Trunk/Hatch Pin      tied in with door
Hood Pin      GREEN/ red      -      keyless module
Trunk/Hatch Release      lt. green            keyless module
      Notes: The keyless module is located to the right of the glove box.

Factory Alarm Arm      purple      -      drivers kick in a white plug
Factory Alarm Disarm      yellow/blue      -      drivers kick in a white plug
Notes: Trigger the power lock and the factory alarm arm wires at the same time to arm the alarm. Trigger the power unlock and the factory alarm disarm wires at the same time to disarm the alarm.

Tachometer      BLACK/ red            dkp, blk 22 pin plug, pin 4

Brake Wire      red      +      brake switch
Horn Trigger      green      -      steering column

Posted By: rekon
Date Posted: November 05, 2006 at 1:24 PM

Awesome thank you for the response! I will post back here once it's all said and done.

Posted By: rekon
Date Posted: November 05, 2006 at 1:25 PM

Awesome thank you for the response! I will post back here once it's all said and done.

Posted By: rekon
Date Posted: November 12, 2006 at 7:07 PM

Well it all installed and working except the fact that I can't find a disarm wire for the factory alarm. I've browsed through 3 different wiring diagrams and they all say a Yellow/Blue wire I've found no yellow/blue wire that disarms the factory alarm.

I didn't need to use the factory alarm button because the wire I tied my - lock wire into locks the doors and activates the factory alarm. When I use the Viper remote the doors unlock and disarms the viper alarm but the factory alarm triggers. I have to use the factory transmitter to disarm the factory alarm.

Can anyone tell me where I can find the factory disarm wire. I would like to find an unlock wire that functions like the lock wire does.

Thanks