Print Page | Close Window

Autopage Temp Sensor

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=8514
Printed Date: May 15, 2024 at 12:37 PM


Topic: Autopage Temp Sensor

Posted By: Jimbob
Subject: Autopage Temp Sensor
Date Posted: January 23, 2003 at 7:44 PM

I just installed an Autopage RS750 LCD and the temp does not display when I puch the start and trunk buttons together.  Anyone ever run into this problem, or had a bad sensor?  Do I need to set it up for it to work or should it work without doing anything special to it?

Thanks



-------------
Jimbob

Beverly Hills



Replies:

Posted By: securinu
Date Posted: January 23, 2003 at 10:58 PM
it is "set" and "trunk" i believe ,at least on my marksman unit it is.




Posted By: Jimbob
Date Posted: January 23, 2003 at 11:30 PM
I tried that after you mentioned it and it looks like that sets the clock alarm.  My manual says it is start and trunk.  I will probably try sending back the sensor.   Thanks

-------------
Jimbob

Beverly Hills




Posted By: gmc4x4
Date Posted: January 24, 2003 at 12:23 AM
its the trunk and panic..or the red and black one's , at least thats how my 750lcd works..

-------------




Posted By: Jimbob
Date Posted: January 24, 2003 at 9:04 AM
Thank a lot Sean,  That was it.  My manual is wrong. 

-------------
Jimbob

Beverly Hills





Print Page | Close Window