2000 Honda Accord, trunk release

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85290
Printed Date: May 10, 2025 at 5:56 PM

Topic: 2000 Honda Accord, trunk release

Posted By: cpugh
Subject: 2000 Honda Accord, trunk release
Date Posted: November 07, 2006 at 2:11 PM

I installed an aftermarket alarm on an 2000 Honda Accord. everything works but the trunk release. The wire from the alarm is (-)500mA but the honda wire is + at rest. How do I hook this up? Thanks

-------------
CP

Replies:

Posted By: bbtaco
Date Posted: November 07, 2006 at 2:20 PM

It is a white /red wire in the drivers kick panel. You will need to use a relay.The correct wire in the car should show 12V when you press the Honda oem remotes trunk release.

Trunk release

Posted By: Chris Luongo
Date Posted: November 07, 2006 at 4:35 PM

If you're at the driver's side fuse box, with your face positioned so that you can see the fuses......look down a little bit. There's a plug that's a little bit under the fusebox; the WHITE/ red is in there.

The instructions that came with your alarm should have wiring instructions for the relay.

Print Page | Close Window