Diesel troubleshooting

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85367
Printed Date: May 10, 2025 at 10:51 PM

Topic: Diesel troubleshooting

Posted By: cristiano
Subject: Diesel troubleshooting
Date Posted: November 08, 2006 at 11:15 PM

I just start remote starter installations and I did a remote starter on my dads truck ( GMC 1996 diesel). Everything is working the only problem is that when i start the car with the remote, after the car starts the engine ligth goes on. And in the morning if he starts the car when he go in, and he press the gaz pedal theres no power. He turns off the ignition and restart the car with the key than no problem .

Do anyone knows something about that problem .. thanks

Replies:

Posted By: Twelvoltz
Date Posted: November 08, 2006 at 11:41 PM

Did you power up the second ignition white wire? The truck could also have a pink/white igntion wire that would need to be powered up but only if the truck has it. If you did not energize the white, DO NOT let him use the remote start till you do, you could cause damage to the transmission. This really sounds as if you may have missed a required connection.

Print Page | Close Window