Print Page | Close Window

98 blazer remote start problem

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85465
Printed Date: July 12, 2025 at 6:47 AM


Topic: 98 blazer remote start problem

Posted By: desh187
Subject: 98 blazer remote start problem
Date Posted: November 11, 2006 at 1:00 AM

I installed a black widow z5 2 way pager alarm/autostart with a gm-sl (self learn)transponder bypass unit.When the vehicle is remote started,it seems as the auto transmission does not shift gears properly.works normal when ign key is used.
I have powered all the ign and accessories(pink,thin white,brown and orange wires)
What should i do next?Has anyone experienced a problem like this?
Thanks.



Replies:

Posted By: qdaddy
Date Posted: November 11, 2006 at 1:28 AM

well pink should be first ign

white 2nd ign

orange accessory

the white wire may be crossed with the accs out instead of the true ign must remember true ign does not dip during crank like accs wire does thus causing the tranny not to power up properly check to make sure they are in right order this is common mistakeposted_image




Posted By: qdaddy
Date Posted: November 11, 2006 at 1:30 AM
oh and on chevy brown (2nd accs) not necessary unless tryin to power the radio or windows durin RS



Posted By: lsondubz
Date Posted: November 11, 2006 at 8:54 AM
Yes, make sure you have the 2nd IGN(white) powered during crank!



Posted By: master5
Date Posted: November 11, 2006 at 12:44 PM

Yes..on late model GM trucks the trans will have problems if the 2nd ignition is not hooked up...It is white BUT at times it is Pink/white. You must dig through the igntion harness, look for these colored wires, verify, and make sure it's connected well.

Your trans problem will be fixed during RS



-------------


Print Page | Close Window