Print Page | Close Window

Configuring a Clifford Remote

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85478
Printed Date: May 11, 2025 at 5:50 PM


Topic: Configuring a Clifford Remote

Posted By: Cougar.Modder
Subject: Configuring a Clifford Remote
Date Posted: November 11, 2006 at 2:28 PM

My battery went dead on my remote so I bought a new one and slipped it in the remote. Now the remote won't work at all. I think I have to reprogram it or something. Anyone have any ideas???

Thanks

-------------
Alpine 7830 HU-4X100 W McIntosh -2X110 W McIntosh-MB Quart Q's Mid Tweets-4X10" Phoenix Gold Subs-Phoenix Gold EQ215ix-AC Epi-PG Line Driver-Phoenix Gold 1 Farad Cap -Clifford Avantguard 4-2 Ear Plugs



Replies:

Posted By: kgerry
Date Posted: November 11, 2006 at 2:54 PM
you should never have to reprogram a remote simply because the battery died.....

-------------
Kevin Gerry
Certified Electronics Technician
MECP First Class Installer

Owner/Installer
Classic Car Audio
since 1979


Print Page | Close Window