CA630, valet button mounting ring size?

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85499
Printed Date: May 14, 2025 at 1:40 PM

Topic: CA630, valet button mounting ring size?

Posted By: nas0827
Subject: CA630, valet button mounting ring size?
Date Posted: November 11, 2006 at 9:39 PM

I lost the mounting ring for the valet/programming button for my ca630. Does any body know what size this is so i can get a new ring?

Replies:

Posted By: topper
Date Posted: November 22, 2006 at 1:01 AM

replace the switch with any momentary switch.

Posted By: swamprat323
Date Posted: November 22, 2006 at 11:23 AM

its a 9/32 hole course threads just5 buy a size smaller or very near it. or just buy a whole new switch, code alarms do not plug in like most alarms they are hard wired

Print Page | Close Window