DEI 1100F Wiring diagram wrong for Ford

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85568
Printed Date: May 07, 2024 at 8:51 AM

Topic: DEI 1100F Wiring diagram wrong for Ford

Posted By: jfkaiser
Subject: DEI 1100F Wiring diagram wrong for Ford
Date Posted: November 13, 2006 at 10:51 AM

Hi Guys,

Just wanted to alert some folks that my DEI 1100F bypass wiring diagram was incorrect for the PATS Connector 3B on my 2002 Ford Explorer.

They should have identified PIN2 as ground and PIN1 as Transmission, but instead they have it reversed.

Just a warning.

Thx,
Jon

Replies:

Posted By: angelars
Date Posted: November 13, 2006 at 11:21 AM

jfkaiser wrote:

PIN1 as Transmission

Don't you mean ignition?

We just installed one of these last week and they are really nice.

Print Page | Close Window