Can someone please tell me what the following wires are for.
auxiliary "-" output
Armed / Disarmed Gnd output
Aux. sensor I/P "-"
I think that we need more information..what are we working on?? The Aux Pwr out usually turns on an external device such as an Amp or an equalizer.
-------------
HotRod
I purchased my alarm through a friend in Taiwan. It has many feature including the following - passive locking, Panic, Valet mode, shock sensor, Engine override, Anti-hijack, Dome light supervision.
There is no wiring Diagram, just a list of the following wires,
grey - siren
white - ignition
thin red - dome light supervision "-" output
Purple - auxiliary "-" output
pink - indicator
Orange - door (+)
red - +12v
green - pin switch
pink - indicator
blue - door (-)
yellow - armed / disarmed gnd output
black - ground
brown - aux. sensor I/P "-"
BLACK/ white - valet switch I/P ("-")
C.D.L.
green - lock common
orange - unlock common
yellow - lock n.o.
yellow/black - unlock n.o
black - lock n.c
BLACK/ white - unlock n.c
Naghtydog posted the following for me:
The locking is neg pulse ( BROWN / red and BROWN / white)
+15 = Black
+30 = Red
+50 = RED / Black at ignition switch
Indicators = BLACK/ Green and BLACK/ White - at yellow plug
Doorswitches = BROWN / White - at yellow plug
Boot = BROWN / White - at yellow plug
Fule pump = Blue/Red in N/S Sill loom
Can someone please help me with the wiring for the central locking.
Also it says there is an immobiliser function.
How is this posible with the wires listed above.