Anti-Grind on Viper 160xp

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85709
Printed Date: May 03, 2025 at 5:59 PM

Topic: Anti-Grind on Viper 160xp

Posted By: musiclee
Subject: Anti-Grind on Viper 160xp
Date Posted: November 16, 2006 at 11:02 AM

Just finished installing myself, as i was afraid dealers would not hook up all the little extras

I hooked up horn, dome, auto-defrost, solenoid for trunk release, but i'm missing anti-grind

The manual says you need to have an optional Failsafe Starter Kill Installed, the brochure says it's part of the 160xv

can someone Please tell me how to get the Anti-Grind working on this?
which wire is it? it says ORANGE / black on ribbon cable, but this cable is already attached.

or is it already part of remote start, and perhaps in the "off" mode

any help would be greatly appreciated...

Replies:

Posted By: swamprat323
Date Posted: November 16, 2006 at 11:11 AM

anti grind is built in the relay pack, could just be turned off, default is turned on. take is back and have them turn it on. the anti grind is only for while the car is remote started.

Posted By: swamprat323
Date Posted: November 16, 2006 at 11:12 AM

aslo the 160 install guide is in the down laod section if want to program it your self

Posted By: musiclee
Date Posted: November 16, 2006 at 11:23 AM

thanks guys, i thought i had to hook up an extra wire or relay or something...

does the install guide have all the programming options, meaning, changing 12, 24, 60 minutes run, doors locking unlocking, lights flashing or constant on?

or is there another document with codes?
i want to be able to change any and all options.

thanks again...

Posted By: swamprat323
Date Posted: November 16, 2006 at 1:33 PM

install guide has all the programing options