Print Page | Close Window

94 LHS disarm wire

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85809
Printed Date: May 14, 2025 at 7:26 AM


Topic: 94 LHS disarm wire

Posted By: amazingaudio
Subject: 94 LHS disarm wire
Date Posted: November 18, 2006 at 1:29 PM

I have installed an autopage rs600 in a 94 chrysler LHS and when I start the vehicle the alarm goes off(factory).  The car arms with the lock on keyless.  I have tried hooking up the disarm wire to the Lt. Green and orange wire in the drivers kick but it didn't change anything.  I meterd the wire also and it is not getting ground when i disarm system with factory remote either so I don't think this is even the right wire.

Any help would be great thanks




Replies:

Posted By: Mike M2
Date Posted: November 18, 2006 at 2:54 PM
It won't show a negative when you use the factory remote. Turn the key in the drivers door cylinder to unlock, that's when you should get your pulse...

-------------
Mike M2
Tech Manager
CS Dealer Services


Print Page | Close Window