07 freestyle

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=85999
Printed Date: May 14, 2025 at 1:39 AM

Topic: 07 freestyle

Posted By: tee-tap1
Subject: 07 freestyle
Date Posted: November 21, 2006 at 7:22 PM

what is the best way to route wires throgh firewall cannot find a easy way any suggestions.

Replies:

Posted By: slicksam
Date Posted: November 21, 2006 at 7:52 PM

Find a place where there are harness of wires going through the firewall......sometime the rubber that holds the wires together at the firewall has enough space to poke a holenext to the wires. I use a metal coathanger.

there always is a way ...check the passenger side also.....if it comes to the last resort.......make your hole..BUT!!!!

BE VERY CAREFUL WHERE YOU DRILL!! check both side where your drilling.....make sure there is nothing in the way that you can damage.

-------------
Testing is the key

Posted By: tee-tap1
Date Posted: November 21, 2006 at 7:56 PM

i have been looking but the sjb is in the way i tried to go through the hood release but no luck have you done one and if so what did you do .

Posted By: mxxmikexx
Date Posted: November 21, 2006 at 8:00 PM

the SJB is only held in with a few bolts, no biggie to get out of way, i just worked on one last week. Didnt run wires through firewall, but i pulled the SJB out of the way.

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106

Posted By: tee-tap1
Date Posted: November 21, 2006 at 8:02 PM

how did you run yourv tach.

Posted By: mxxmikexx
Date Posted: November 21, 2006 at 11:21 PM

just used tachless mode on audiovox unit, never had problems with tachless.

-------------
Mike Battaglia
Specialized Car Audio
Bensenville IL 60106