Print Page | Close Window

2004 Honda Odyssey Confirmation

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86006
Printed Date: May 09, 2024 at 5:00 PM


Topic: 2004 Honda Odyssey Confirmation

Posted By: daxton
Subject: 2004 Honda Odyssey Confirmation
Date Posted: November 21, 2006 at 10:36 PM

Hi All...
   Just need a quick confirmation on interfacing with the door locks on a 2004 Odyssey EXL.. Looking at bulldog, and searching through the forum to get DirectWire, both sources show Power Lock, and unlock the same. BUT on directwire, the also show lock motor and unlock motor. Would i interface to just the BLACK/ blue and orange to allow power locks to work?
Finally, i read somewhere that activating the power locks will actually arm the factory system. Can someone confirm this, or do i just have to hit the wire that will lock the doors, and not the factory alarm.

Thanks again to all for the help!
below is just for reference.

dax.

==========================================

BulldogSecurity
POWER LOCK BLACK/ BLUE (TYPE B) See NOTE *1   @ PASSENGER SIDE FUSEBOX, See NOTE *2     
POWER UNLOCK ORANGE (TYPE B) See NOTE *1   @ PASSENGER SIDE FUSEBOX, See NOTE *2
NOTE *2 these wires are found in a 20-pin plug on the LX models and on the EX models the wires are in a 3-pin plug.

DirectWire
Power Lock BLACK/ blue   -   passenger fuse box
Notes: Found in a 20 pin plug on LX models, and a 3 pin plug on EX models.
Power Unlock orange   -   passenger fuse box

Lock Motor WHITE/ red   5wi driver fuse box, 18 pin plug
Unlock Motor lt. GREEN/ red   5wi driver fuse box, 18 pin plug



Replies:

Posted By: topper
Date Posted: November 21, 2006 at 11:18 PM

Confirmed--- only use the BLACK/ blue and orange (-) inputs  EX models will also arm/disarm factory alarm






Print Page | Close Window