2002 dodge caravan

Printed From: the12volt.com
Forum Name: Car Security and Convenience
Forum Discription: Car Alarms, Keyless Entries, Remote Starters, Immobilizer Bypasses, Sensors, Door Locks, Window Modules, Heated Mirrors, Heated Seats, etc.
URL: https://www.the12volt.com/installbay/forum_posts.asp?tid=86067
Printed Date: May 14, 2025 at 2:30 AM

Topic: 2002 dodge caravan

Posted By: nima
Subject: 2002 dodge caravan
Date Posted: November 23, 2006 at 11:04 AM

i need help on remote start, i can not start with remote it only doing is crenking i connect 2nd start wire 180ohm and relay,

87 to ground 180ohm

85 to start wire on unit

30 to 2nd start wire perple/brown

86 to 12 volt

i need help please

Replies:

Posted By: thepencil
Date Posted: November 23, 2006 at 11:09 AM

Have you got Tach learned?

Do you have a Grey colour key or a Black colour key?

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: nima
Date Posted: November 23, 2006 at 11:19 AM

black color key

i connect the tach wire to blue/green on pcm

Posted By: Mike M2
Date Posted: November 23, 2006 at 11:27 AM

You say "85 to start wire on unit". Is this the positive starter wire on your RS or a negative output during crank? If it's the positive you have it wired wrong, 86 would go to ground.

-------------
Mike M2
Tech Manager
CS Dealer Services

Posted By: nima
Date Posted: November 23, 2006 at 11:45 AM

it is positive, i connect 85 to ground and it works fine now

Thank you very much u the man of 12volt

Posted By: nima
Date Posted: November 23, 2006 at 1:00 PM

Mike M2

sorry to bothor you again but after i connect the 85 to ground it does start from remote but it wont start with key any more

please help me

Posted By: thepencil
Date Posted: November 23, 2006 at 1:25 PM

You are also activating the relay with the 180 ohm with the current setup.

Try this

87 to ground 180ohm

85 to the GROUND OUT WHEN RUNNING WIRE off the remote starter unit

30 to 2nd start wire perple/brown

86 to +12V starter wire from your remote starter unit.

This setup the relay doesn't get activated when you are using the key and will only activated on remote start.

-------------
Be careful whose advice you buy, but be patient with those who supply it. posted_image

Posted By: nima
Date Posted: November 23, 2006 at 2:25 PM

its work now

thanks,

Print Page | Close Window